Design Tools / Core Selection

MAGAMP Design Tool

The MAGAMP Design Tool was created as a Design Tool, to assist you in your application Designs of:
MAGAMP Core Design, Magnetic Amplifiers, Secondayr Side Regulator Design, Magnetic Switch Design

Output Inductor Design Tool

The OUTPUT INDUCTOR Design Tool was created as a Design Tool, to assist you in your application Designs of:
Flyback Transformer Design, Forward Converter output Filter Design, Half Bridge Converter output filter Design , Full Bridge Converter output filter Design, VRM Inductor Design, Voltage regulation module design, synchronis rectification output inductor design

AC Reactor Design Tool

The AC Reactor Design Tool was created as a Design Tool, to assist you in your application Designs of:
Harmonic Filter Design, UPS Harmonic Filter Design, dv/dt Inductor Design, Harmonic Filter for Distributed Power Generation, Solar Cell Harmonic Filter Design, Wind Power Harmonic Filter Design, Wind Power Harmonic Filter Design.

DC Reactor Design Tool

The DC Reactor Design Tool was created as a Design Tool, to assist you in your application Designs of:
Choke Design, High PowerHarmonic Filter Design, Power Factor Harmonic Filter Design, Input Inductor Design, DC Link Reactor Design, DC Link Filter.

PFC Design Tool

The PFC Design Tool was created as a Design Tool, to assist you in your application Designs of:
Power Factor Choke Designs, Boost Inductor Designs, PFC Input Boost Power Supply Design, Power Factor Corection Core Designs

Common Mode Choke Design Tool

The Common Mode Choke Design Tool was created as a Design Tool, to assist you in your application Designs of:
EMI Noise suppression applications, Line Noise Reduction Applications.

Normal Mode Choke Design Tool

The Normal Mode Choke Design Tool was created as a Design Tool, to assist you in your application Designs of:
Choke Design, Differnetial Mode Choke Design Applications

To Keep the download size to a minimum, the Design Tool Program does not contain the Visual Basic 6.0 Runtime files. They are required to run the program, but most PC's already have them installed.

If you're not sure, you can download and run the File Checker. The File Checker is a VB Script that will look to see if the required files are installed on your PC.

If you do not have the Visual Basic 6.0 Runtime installed on your PC, you can download the newest version, that supports all version of windows, directly from Micorsoft.com

The FileChecker is a vbs file that checks for compatability